Houston, Texas

Texas and nationwide

Request Recovery

Guide

How to Check IfEquipment Is Stolen

Off-road machines are identified by a PIN or a serial number, and the format varies by manufacturer. The checks that work run on the plate, an equipment register, the lien record and the police.

Why a Machine Is Harder to Check Than a Trailer

Knowing how to check if equipment is stolen begins with the plate on the machine. ISO 10261:2021 sets out a product identification number system for earth-moving machinery. ISO notes the same PIN can be used on other off-road work machines, but the standard does not apply to components or attachments.

The National Equipment Register describes the identifier as varying in format from one manufacturer to the next: a PIN, a serial number, a tractor ID number. Write down whatever the plate says, exactly as it is stamped.

Title records are thinner, too. Texas titles motor vehicles and trailers over 4,000 pounds. The same title chapter refers to equipment that is not required to be titled. Where a machine has no title, the paper trail is the bill of sale, the dealer invoice, the finance documents and any lien filing.

The National Equipment Register

One stolen equipment database built for heavy machines is the National Equipment Register. NER was founded in 2001, and its site says National Equipment Register is now Verisk. It describes itself as a data resource and says it does not physically locate stolen machines.

Owners register machines in its HELPtech database with the make, model, year and PIN. Once a machine is registered, NER says, law enforcement, their investigative agents and NER analysts can see the record. NER also says it gives law enforcement free assistance and access to its data.

For a buyer, the product is IRONcheck, a paid history report. NER's IRONcheck page says it draws on over 20 million heavy equipment theft and ownership records and adds an insurance claim history and a UCC history search for each machine.

The FBI's NCIC has seven property files, and only authorized criminal justice agencies can search them. When a machine's history raises a question, the police are the route into those files.

How to Check If Equipment Is Stolen, Step by Step

  1. Find Every Number on the Machine

    Start with the PIN plate and write down every other number stamped or plated on the machine. NER's advice is to use the details on the machine's plate, not the invoice. Photograph each plate close up and again from a step back, so the picture shows where it sits.

  2. Look Hard at the Plate

    Loose or replaced rivets, fresh paint around the plate, a plate on a part that is easy to swap: write each one down. Texas Penal Code section 31.11 makes it an offense to knowingly or intentionally remove, alter or obliterate a serial number, and property involved may be treated as stolen for custody and disposition.

  3. Make the Paper Match the Plate

    Ask for the bill of sale, the dealer invoice from the first sale if the seller has it, and any finance or lease papers. Every document should carry the same PIN, character for character, and the same make, model and year.

  4. Order a History Report

    Run an IRONcheck on the PIN and keep the report with the deal file. NER says its analysts flag any inaccuracies they find, so read the notes as closely as the theft result.

  5. Search the Lien Record

    A creditor files a UCC financing statement to notify other creditors that a debtor's assets are collateral. In Texas the Secretary of State is the central filing office, and its SOSPortal charges a small statutory fee for each search.

  6. Call the Police When It Does Not Add Up

    If the plate looks altered, the numbers disagree or a report shows a theft record, stop the deal and call the police. They can query NCIC, and any hit has to be confirmed by the agency before it acts.

Reading What Comes Back

An IRONcheck with no theft record means NER found no matching theft record in its data. NER's IRONcheck disclaimer says it cannot accept responsibility for losses tied to equipment not listed on the Register, so a clean report narrows the question without closing it.

A UCC filing against the seller means a creditor has given notice that some of the seller's assets secure a debt. Whether that interest follows the machine to a buyer is a legal question for counsel, not one the search answers.

When the Machine Is Already Gone

The checks above protect a buyer. An owner, a lessor or a lender with a machine missing from a yard or a job site needs something else: where it is now, and who has it.

Call the police first and keep the report number. NER, for one, will not log a loss as a theft without it.

Then send us when and where the machine was last seen, the PIN and any other number on the machine, and who had keys or access to the site. Add every call and message about it, with the time. Our asset location work runs on the records and the routine around the machine. When we have a location, you receive it with a written account of how we know, and recovery runs through law enforcement or a licensed recovery partner. BlackLine Recovery Group takes cases from Houston to anywhere in Texas and nationwide. Our founder, Gil Leon, is a former U.S. Marshal who served on the U.S. Marshals Middle Tennessee Joint Fugitive Task Force, and he reads each request himself.

Sources

Facts about laws, agencies and places on this page come from the sources below. Nothing on this page is legal advice.

  1. ISO, ISO 10261:2021 Earth-moving machinery, product identification numbering systemiso.org
  2. National Equipment Register, FAQsner.net
  3. National Equipment Register, About usner.net
  4. National Equipment Register, HELPtechner.net
  5. National Equipment Register, IRONcheckner.net
  6. FBI, National Crime Information Center (NCIC)le.fbi.gov
  7. NICB, VINChecknicb.org
  8. Texas Transportation Code, Chapter 501 (Sections 501.002 and 501.0321)statutes.capitol.texas.gov
  9. Texas Penal Code, Section 31.11statutes.capitol.texas.gov
  10. Texas Secretary of State, Uniform Commercial Codesos.state.tx.us
  11. Texas Secretary of State, SOSDirect and SOSPortalsos.state.tx.us

How We Help With Equipment

  • Asset Location

    For a machine that left a yard or a site without permission, we begin with the plate numbers and the last confirmed location and work outward until one place is left to look. The report names who has it and keeps what we saw separate from what we think.

    Read About Asset Location
  • Asset Tracking

    Before the next machine moves between sites, we can fit tracking equipment so any search would start from a known position. What is fitted, where, and who sees the reports is agreed with you first.

    Read About Asset Tracking

CommonQuestions

  1. The registers covered here are either paid or closed. NER's IRONcheck is a paid report, its HELPtech register is built from owner registrations, and NCIC is open only to authorized criminal justice agencies. NICB's free VINCheck describes its coverage as vehicles insured in the U.S. plus some motorcycles and watercraft.

  2. It does not. NER says equipment does not have to be registered with it for a theft to be reported. It asks owners to report to local police first and treats a report without a police report number as a missing machine.

  3. It shows financing statements that lenders filed to give notice that a debtor's assets are collateral. In Texas those are filed with the Secretary of State. What a filing means for a particular sale is a question for counsel.

  4. Texas Penal Code section 31.11 makes it an offense to possess, sell or offer to sell property when the person knows, or a reasonable person would have known, that the serial number was removed, altered or obliterated. The section sets it as a Class A misdemeanor. Ask counsel how it applies to a specific purchase.

Tell UsWhat You Know.

Send the facts you have. Gil reads every request himself.

Request Recovery